Lantronix TS-DDH Manuel d'utilisateur télécharger pdf (Page 14)

Data Downloading Hardware

Fig. 14

7. Click Apply.

The program should now update the settings and reboot the device.

When in use, both ports should have a baud rate matching the controller baud setting,

115200. (The factory default is 9600.) Also be sure that Data bits = 8, Parity = None, Stop

bits = 1, Flow control = none. (These should be the factory default settings.)

The Ethernet Redirector

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Lantronix TS-DDH Manuel d'utilisateur Page 14