Lantronix SLPV1611E-02 Guide de l'utilisateur télécharger pdf (Page 61)

3: Operations

SLP: set sntp primary 204.152.184.72<Enter>

The following command sets the secondary SNTP server address to

cuckoo.nevada.edu:

SLP: set sntp secondary

cuckoo.nevada.edu<Enter>

Setting the local GMT offset

The Set SNTP GMT offset command is used to set the offset from GMT for the

date/time returned by SNTP. The offset can be configured in whole hours between -

12 and 12 hours.

Note: The SLP does not support automatic adjustment for daylight savings.

To set the local GMT offset:

1. At the command prompt, type set sntp gmtoffset, followed by the offset

value and press Enter.

Example

The following command sets the local GMT offset to -12:

SLP: set sntp gmtoffset -12<Enter>

Displaying SNTP configuration information

The Show SNTP command displays all SNTP configuration information.

To display SNTP configuration information:

1. At the command prompt, type show sntp and press Enter.

Example

The following command displays the SNTP configuration information:

SLP: show sntp<Enter>

Date/Time (Local GMT Offset -12): 2006-02-21 21:32:48

Primary Host: 204.152.184.72

Secondary Host: cuckoo.nevada.edu

Displaying network configuration information

The Show Network command displays TCP/IP, Telnet, SSH, Web, SSL and SNMP

configuration information.

IP address, subnet mask and gateway

Enabled-disabled status of Telnet, SSH, HTTP,SSL and SNMP support

Telnet, SSH, and HTTP port numbers

HTTP authentication method and SSL access setting

Network status

See 4:Advanced Operations for more information on SNMP

To display network configuration information:

SecureLinx SLP Remote Power Manager 60

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 108 109

Pas de commentaire

Lantronix SLPV1611E-02 Guide de l'utilisateur Page 61