Lantronix EDS4100 Guide de l'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 163
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
EDS User Guide 25
3: Installation of EDS8PS and EDS16PS
This chapter describes how to install the EDS8PS and EDS16PS device servers.
Package Contents
Your EDS package includes the following items:
One EDS device server (EDS8PS or EDS16PS)
One RJ45-to-DB9F serial cable
One power cord
User-Supplied Items
To complete your EDS8/16PS installation, you need the following items:
RS-232 serial devices that require network connectivity. Each EDS8/16PS serial port supports
a directly connected RS-232 serial device.
A serial cable for each serial device to be connected to the EDS8/16PS. All devices attached
to the device ports support the RS-232C (EIA-232) standard. Category 5 cabling with RJ45
connections is used for the device port connections.
Note: To connect an EDS8/16PS serial port to a DTE device, you need a DTE cable,
such as the one supplied in your EDS8/16PS package, or an RJ45 patch cable and DTE
adapter. To connect the EDS8/16PS serial port to a DCE device, you need a DCE
(modem) cable, or an RJ45 patch cable and DTE adapter. For a list of the Lantronix
cables and adapters you can use with the EDS8/16PS, see the Appendix D - Lantronix
Cables and Adapters (on page 158).
An available connection to your Ethernet network and an Ethernet cable.
A working power outlet.
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 162 163

Commentaires sur ces manuels

Pas de commentaire