Lantronix UDS1100-IAP Guide de l'utilisateur télécharger pdf (Page 38)

6: Setup Mode: Server Configuration

UDS1100 User Guide 38

default setting is N (No), meaning the gateway address has not been set. To set the

gateway address, type Y and enter the address.

Set Gateway IP Address (N) ? Y

Gateway IP addr (000) (000) (000) (000)_

Netmask: Number of Bits for Host Part

A netmask defines the number of bits taken from the IP address that are assigned for

the host part.

Netmask: Number of Bits for Host Part (0=default) (0) _

Note: Class A: 24 bits; Class B: 16 bits; Class C: 8 bits

The unit prompts for the number of host bits to be entered, then calculates the

netmask, which appears in standard decimal-dot notation (for example,

255.255.255.0) when the saved parameters display. The default setting is 0.

Table 6-2. Standard IP Network Netmasks

Network Class Host Bits Netmask

A 24 255.0.0.0

B 16 255.255.0.0

C 8 255.255.255.0

Change Telnet Configuration Password

Setting the Telnet configuration password prevents unauthorized access to the setup

menu through a Telnet connection to port 9999 or through web pages. The password

must have 4 characters. The default setting is N (No).

Figure 6-2. Change Telnet Configuration Password

Change telnet config password (N) ? _

An enhanced password setting (for Telnet access only) of 16 characters is available

under Security Settings (Option 6) on page 56.

Note: You do not need a password to access the Setup Mode window by a

serial connection.

DHCP Name

If a DHCP server has automatically assigned the IP address and network settings,

you can discover the unit by using the DeviceInstaller network search feature or

Monitor Mode (see 10: Monitor Mode).

Note: When you enter Monitor Mode from the serial port with network

connection enabled and issue the NC (Network Communication) command,

you see the unit’s IP configuration.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 82 83

Pas de commentaire

Lantronix UDS1100-IAP Guide de l'utilisateur Page 38