Lantronix SLPV1611E-02 Guide de l'utilisateur télécharger pdf (Page 38)

3: Operations

Examples

The following command turns the second outlet on, using the outlet’s absolute name:

SLP: on .a2<Enter>

The following command turns on all the outlets in the group named ServerGroup_1:

SLP: on ServerGroup_1<Enter>

Turning outlets off

The Off command turns off one or more outlets. When the command completes, a

display indicating all outlets affected and their current states will be displayed.

To turn outlets off:

1. At the command prompt, type off, followed by one or more outlet names

separated by spaces or commas, and press Enter, or

2. Type off, followed by a group name, and press Enter, or

3. Type off all and press Enter.

Examples

The following command turns off the outlet named FileServer_1:

SLP: off FileServer_1<Enter>

The following command turns off all outlets:

SLP: off all<Enter>

Rebooting outlets

The Reboot command reboots one or more outlets. This operation turns the outlet(s)

off, delays for a period of 15 seconds and then turns the outlet(s) on. When the

command completes, a display indicating all outlets affected and their current states

will be displayed.

Note: It is necessary to reissue the Status command to verify that the outlets

have rebooted after 15 seconds. See Displaying outlet information on page

50 for more information.

To reboot one or more outlets:

1. At the command prompt, type reboot, followed by one or more outlet names

separated by spaces or commas, and press Enter, or

2. Type reboot, followed by a group name, and press Enter, or

3. Type reboot all and press Enter.

Example

The following command reboots all the outlets in the group named ServerGroup_1:

SLP: reboot ServerGroup_1<Enter>

SecureLinx SLP Remote Power Manager 37

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 108 109

Pas de commentaire

Lantronix SLPV1611E-02 Guide de l'utilisateur Page 38