Lantronix Computer Hardware 900-581 Manuel d'utilisateur télécharger pdf (Page 210)

5: Commands and Levels

no username

Clears the user name.

password <text>

Sets the value for the password.

<text> = put quotes around the characters (max 63).

peap option eap-md5

Sets the PEAP authentication protocol option to EAP-MD5.

peap option eap-mschapv2

Sets the PEAP authentication protocol option to EAP-MSCHAP

V2.

show

Shows the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

username <text>

Sets the value of the username.

<text> = value in characters (max 63).

validate certificate disable

Skips verification of the server certificate when connecting.

validate certificate enable

Requires verification of the server certificate when connecting.

write

Stores the current configuration in permanent memory.

wpax (config-profile-security-wpax:default_adhoc_profile) level commands

apply wlan

Try out WLAN settings without saving them to Flash.

If the settings do not work, when you reboot the device,

it will still have the original settings.

authentication 802.1x

Sets the authentication method to IEEE 802.1x.

authentication psk

Sets the authentication method to PSK.

clrscrn

Clears the screen.

credentials <text>

Selects the RSA certificate by configured name.

default authentication

Restores the authentication method to the default value (PSK).

default eap-ttls option

Restores the eap-ttls protocol options to the default (EAP-

MSCHAP V2).

default encryption

Restores the encryption type to the default value (none enabled).

default ieee 802.1x

Restores the default IEEE 802.1x protocol, EAP-TTLS.

default peap option

Restores the PEAP authentication protocol options to the default

(EAP-MSCHAP V2).

eap-ttls option chap

Sets the EAP-TTLS authentication protocol option to CHAP.

eap-ttls option eap-md5

Sets the EAP-TTLS authentication protocol option to EAP-MD5.

eap-ttls option eap-mschapv2

Sets the EAP-TTLS authentication protocol option to EAP-

MSCHAP V2.

eap-ttls option mschap

Sets the EAP-TTLS authentication protocol option to MSCHAP.

eap-ttls option mschapv2

Sets the EAP-TTLS authentication protocol option to MSCHAP

V2.

eap-ttls option pap

Sets the EAP-TTLS authentication protocol option to PAP.

encryption ccmp disable

Disables this encryption method.

encryption ccmp enable

Enables this encryption method.

encryption tkip disable

Disables this encryption method.

encryption tkip enable

Enables this encryption method.

encryption wep disable

Disables this encryption method.

encryption wep enable

Enables this encryption method.

exit

Exits to the next higher level.

ieee 802.1x eap-tls

Sets the IEEE 802.1x protocol to EAP-TLS.

ieee 802.1x eap-ttls

Sets the IEEE 802.1x protocol to EAP-TTLS.

ieee 802.1x leap

Sets the IEEE 802.1x protocol to LEAP.

PremierWave EN Command Reference 210

1 2 ... 205 206 207 208 209 210 211 212

Commentaires sur ces manuels

Pas de commentaire

Lantronix Computer Hardware 900-581 Manuel d'utilisateur Page 210

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Lantronix Computer Hardware 900-581