Lantronix Computer Hardware 900-581 Manuel d'utilisateur télécharger pdf (Page 53)

5: Commands and Levels

A decimal value character has the form \99.

A hex value character has the form 0xFF.

tcp keep alive <milliseconds>

Enables TCP keep alive for accept mode tunneling and sets the

timer.

<milliseconds> = timer value, in milliseconds.

write

Stores the current configuration in permanent memory.

accept (tunnel-accept:1) level commands

accept mode always

Enables the tunneling server to always accept tunneling connec-

tions.

accept mode any character

Enables the tunneling server to accept tunneling connections only

when a

character is received through the corresponding line (serial port).

accept mode disable

Disables accept mode tunneling.

accept mode modem control asserted

Enables the tunneling server to accept tunneling connections

when the modem

control pin is asserted.

accept mode modem emulation

Enables modem emulation for accept mode tunneling.

accept mode start character

Enables accept mode tunneling when the configured start charac-

ter

is received on the line.

aes decrypt key <hexadecimal>

Sets the accept tunnel AES decrypt key with up to 16 bytes.

Each byte is represented by two adjacent hex digits.

Bytes may run together or be separated by optional punctuation:

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

Note that quotes must enclose the value if it contains spaces.

aes decrypt key text <text>

Sets the accept tunnel AES decrypt key with up to 16 bytes.

Each byte is represented by a single character.

Note that quotes must enclose the value if it contains spaces.

aes encrypt key <hexadecimal>

Sets the accept tunnel AES encrypt key with up to 16 bytes.

Each byte is represented by two adjacent hex digits.

Bytes may run together or be separated by optional punctuation:

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

Note that quotes must enclose the value if it contains spaces.

aes encrypt key text <text>

Sets the accept tunnel AES encrypt key with up to 16 bytes.

Each byte is represented by a single character.

Note that quotes must enclose the value if it contains spaces.

block network disable

Forwards (tunnels) network data in accept mode tunneling.

block network enable

Discards all data coming in from the accept mode tunnel before

forwarding

it to the serial interface (generally used for debugging).

block serial disable

Forwards (tunnels) serial data in accept mode tunneling.

block serial enable

Discards all data coming in from the serial interface before for-

warding

it to the accept mode tunnel (generally used for debugging).

clrscrn

Clears the screen.

cp output

Enters the next lower level.

credentials <text>

Selects the RSA/DSA certificates by name for the SSL server.

default accept mode

Restores the default accept mode as "always".

default local port

Uses the default port number as the local port for accept mode

tunneling.

The default port is 10000 + #, where # is the line number for this

tunnel.

PremierWave EN Command Reference 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 211 212

Commentaires sur ces manuels

Pas de commentaire

Lantronix Computer Hardware 900-581 Manuel d'utilisateur Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Lantronix Computer Hardware 900-581