Lantronix Printer LPS1-T Manuel d'utilisateur télécharger pdf (Page 25)

TCP/IP Configuration LPR Printing

4-9

5 From the next dialog box, choose Remote Printing.

6 The Add a Standard Remote Print Queue dialog box will appear. Enter the fol-

lowing information.

❍ The name of the print queue,

❍ The name of the MPS unit,

❍ The name of the MPS service,

❍ The type of print spooler on the remote server, and

❍ A description of the printer on the remote server.

7 A dialog box will appear: “Added print queue mps_prt”. Click Done.

Note: If you are unable to use SMIT, see the Print Server Reference Manual

on the CD-ROM for UNIX commands used to set up print queues.

8 Print to the queue using normal lp syntax.

Figure 4-10: Printing to Queue

4.2.5 LPR on HP Hosts

The System Administration Manager (SAM) allows you to create print queues.

Note: If you are unable to use SAM, the Print Server Reference Manual lo-

cated on the CD-ROM describes UNIX commands that can be used to

set up print queues.

Note: Printer names on HP hosts are limited to 13 characters. The MPS text

service name will be too long, so you will have to rename the MPS.

To create a print queue:

1 At the HP prompt, type sam.

2 From the main application window, choose Printers and Plotters.

3 In the Printers and Plotters window, choose Printers/Plotters.

4 In the pull-down menu, select Remote Printer/Plotter from the Actions menu.

5 The Add Remote Printer window will appear. SAM will prompt you for:

❍ The printer name (the name of the print queue),

❍ The remote system name (the MPS name),

❍ The remote printer name (the MPS service),

% lp -dmps_prt filename

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Pas de commentaire

Lantronix Printer LPS1-T Manuel d'utilisateur Page 25