Lantronix EDS1100 Guide de l'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 157
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
EDS1100/2100 User Guide 20
3: Installation of EDS1100
This chapter describes how to install the EDS1100 device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Installing the EDS1100
Package Contents
The EDS1100 package includes the following items:
One EDS1100 device
One DB25M-to-DB9F serial cable
Power Cube, 100-240 VAC with international adapters
Power cord restraint
Printed Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial device that requires network connectivity.
A serial cable, as in the following list, for your serial device. One end of the cable must have a
male DB25 connector for the serial port.
- A null modem cable to connect the serial port to a DCE device.
- A straight-through modem cable, such as the one supplied in the package, to connect the
serial port to a DTE device.
An available connection to your Ethernet network and an Ethernet cable.
A working power outlet if the unit will be powered from an AC outlet.
Hardware Components
The EDS1100 has a female DB25 serial port that supports RS-232, RS-422, and RS-485 serial
devices. The default serial port settings are 9600 baud, 8 bits, no parity, 1 stop bit, no flow control.
Figure 3-1 shows the front panel.
Figure 3-1 EDS1100 DB25 (Female) Serial Port
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 156 157

Commentaires sur ces manuels

Pas de commentaire