Lantronix EDS1100 Guide de l'utilisateur télécharger pdf (Page 53)

8: Line and Tunnel Settings

EDS1100/2100 User Guide 52

Accept Mode supports the following protocols:

 SSH (EDS1100/2100 acts as the server). When using SSH, the SSH server host keys and at

least one SSH authorized user must be configured.

 SSL

 TCP

 AES encryption over TCP

 Telnet (EDS1100/2100 supports IAC codes. It drops the IAC codes when Telnetting and does

not forward them to the serial port).

Accept Mode has the following states:

 Disabled (never a connection)

 Enabled (always listening for a connection)

 Active if it receives any character from the serial port

 Active if it receives a specific (configurable) character from the serial port (same start

character as Connect Mode’s start character)

 Modem control signal

 Modem emulation

To configure Accept Mode, perform the following steps.

1. Click Tunnel 1 > Accept Mode. Figure 8-14 shows the page displays.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 156 157

Pas de commentaire

Lantronix EDS1100 Guide de l'utilisateur Page 53