Lantronix SCS1620 Guide de l'utilisateur télécharger pdf (Page 42)

SCSxx05/SCSxx20 User Guide 4: Configuration

4-2

Topic Page

Configuring Device Ports 4-5

Updating Software 4-14

Using Done 4-16

Saving 4-17

Rebooting 4-17

Connecting Using Telnet or Your Serial Terminal

If you are not already connected as described in Quick Start, you have two

options:

 Connect the terminal port to a VT100 terminal device or computer using

a VT100 terminal emulation program. (See Connecting a Terminal.)

 Telnet via your network connection.

Your screen displays the SCS name and a login prompt after power-up.

Logging in as System Administrator

If you are not already logged in as described in Quick Start, follow these steps:

1. Type sysadmin (a predefined user with special privileges) and press Enter.

The Password prompt displays.

SCS4805 login: sysadmin

Password:

sysadmin>

2. Type your password and press Enter. The default password is PASS. (The

password does not display when you type it.) If this is the first time you have

logged in as the system administrator, the setup (configuration) screen

displays.

Accessing the Setup Menu

The following screen displays when the setup program starts, whether

automatically (the first time the sysadmin logs in) or when the system

administrator enters the setup command after logging in.

1. If this is not the first time you have logged in, type setup and press Enter.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 140 141

Pas de commentaire

Lantronix SCS1620 Guide de l'utilisateur Page 42