Lantronix SCS1620 Guide de l'utilisateur télécharger pdf (Page 69)

SCSxx05/SCSxx20 User Guide 4: Configuration

4-11

File Logging by Port

This option includes the following parameters:

 Enable/disable (default is disabled)

 Number of files saved per port

 Log file path (can be NFS mounted)

 Log file size (in bytes)

1. With File Logging Port selected, press Enter. The log to file flag prompt

displays.

2. Select Enable to enable file logging for the selected device port(s), or select

Disable to disable file logging, and press Enter. The number of files saved

per port prompt displays.

3. Enter the number of files to be logged for the device port(s). These files

keep a history of the data received from the port(s). The default value is two

files (even if no entry is made here); you may keep as many files as you

wish.

If you are specifying a range or a group of ports, remember that each port will

have its own unique files (the log file name(s) contain the port number to

differentiate the similar files in the log file directory).

4. Press Enter. The log file path prompt displays.

5. Enter the log directory path for the log file(s). The system defaults this path to

/var/tmp/ if you make no entry. Ensure that the directory exists and is

writeable.

Set Log File Path for Device Port xx.

Set the Log File Path name (must end in / i.e.

/var/log/tmp/) for Port xx

Answer: /var/tmp/

6. Press Enter. The log file size prompt displays.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 140 141

Pas de commentaire

Lantronix SCS1620 Guide de l'utilisateur Page 69