Lantronix XPort AR Manuel d'utilisateur télécharger pdf (Page 27)

4: Configuration Using Web Manager

XPort AR User Guide 27

Figure 4-11. Line 1 Configuration

2. Enter or modify the following fields:

Status

Displays the whether the current line is enabled. To change

the status, select Enabled or Disabled from the pull-down

menu.

Baud Rate

Select the XPort AR’s baud rate from the pull-down menu.

The default is 9600.

Parity

Select the XPort AR’s parity from the pull-down menu. The

default is None.

Data Bits

Select the number of data bits from the pull-down menu. The

default is 8.

Stop Bits

Select the number of stop bits from the pull-down menu. The

default is 1.

Flow Control

Select the XPort AR’s flow control from the pull-down menu.

The default is None.

3. Click Submit. Changes are applied immediately to the XPort AR.

Line 1 Command Mode

Setting Command Mode enables the CLI on the serial line.

To configure Line 1’s command mode:

1. Click Line 1 Æ Command Mode from the navigation menu. The Line 1

Command Mode window displays.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 155 156

Pas de commentaire

Lantronix XPort AR Manuel d'utilisateur Page 27