Lantronix UDS100 Manuel d'utilisateur télécharger pdf (Page 36)

Configuring the UDS Using Telnet or the Serial Port UDS10/UDS100 User Guide

TCP Keepalive time in s

This option defines how many seconds the unit waits during a silent connection

before checking to see whether the currently connected network device is still on the

network. If the unit does not receive a response, it drops that connection.

ARP Cache timeout in s

When the unit communicates with another device on the network, it adds an entry

into its ARP table. The ARP Cache timeout option defines the number of seconds

(1-600) the unit waits before timing out an entry in this table.

Security Settings

Change these settings using Telnet or serial connections only, not Web Manager.

Note: We recommend that you set security over the dedicated network or

over the serial setup. If you set security over the network (Telnet 9999),

someone else could capture these settings.

Caution: Disabling both Telnet Setup and Port 77FE prevents users

from accessing the Setup Mode from the network.

Figure 5-8. Security Settings

Disable SNMP

This setting disables the SNMP protocol on the unit to prevent SNMP management

software from communicating with the UDS.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

Pas de commentaire

Lantronix UDS100 Manuel d'utilisateur Page 36